Manual

Y1-03-0233 Rev. J 34
The fourth test checks for 406 MHz signal
strength/RF power. If power is adequate the system passes.
The fourth test checks for 406 MHz signal
strength/RF power. If power is not adequate the system fails.
The fifth test checks GPS engine readiness. If the
GPS is ready the beacon passes.
The fifth test checks GPS engine readiness. If the GPS is not ready the beacon fails.
The sixth test checks four LEDs, collectively the
LED strobe, for functionality. If all LEDs are working the test passes.
The sixth test checks four LEDs, collectively the LED strobe, for functionality. If all LEDs are
not working the test fails.
If all six tests pass, the system advises you that Self-Test passed.
This message appears if Self-Test has passed. The display indicates that the external GPS
has updated its coordinates during Self-Test.
This message will scroll across screen, right-to-left, if Self-Test has passed and external
GPS coordinates were acquired. The latitude (LT) and longitude (LG) coordinates are
provided.
406 RF
TEST √
beep
beep beep
beep
GPS
TEST 
beep beep
LIGHT
TEST √
beep
LIGHT
TEST 
beep beep
SELF
TEST
PASS
NMEA
GPS
DATA
LT: 26.03.033N LG: 80.10.066W
GPS
TEST √
406 RF
TEST 
G
R
G
R
G
R
G