User guide

ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ME406P (453-6611)
25-62-31
Page 46 of 85
JUN 25/13
REMOVAL
TASK 25-62-31-010-801
1. ELT
SUBTASK 25-62-31-010-001
A. ELT Removal
(1) See Figure 12. ELT Removal Sequence.
Figure 12. ELT Removal Sequence
(2) Disconnect the antenna coax cable.
NOTE
: Check the coax cable center conductor pin which is prone to retracting into the
connector housing.
(3) Remove remote switch harness D-sub plug.
(4) Open the velcro strap.
(5) Slide the ELT up and out, and away from the mounting tray.
MOUNTING
TRAY ASSY
ELT MAIN
ASSEMBLY
1
2
3
4
DISCONNECT COAX
DISCONNECT HARNESS
UNDO VELCRO STRAP
(STRAP SHOWN IN
CLOSED POSITION)
NOTE: Coax cable and
wiring harness not
shown for clarity.
MOUNTING
TRAY ASSY
ELT MAIN
ASSEMBLY
1
2
3
4
DISCONNECT COAX
DISCONNECT HARNESS
UNDO METAL STRAP
(STRAP SHOWN IN
CLOSED POSITION)
NOTE: Coax cable and
wiring harness not
shown for clarity.