IMPORTANT SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page Index Product Carton Contents......................................................................................... 1 Initial Setup.............................................................................................................. 2-3 Radio Operation.......................................................................................................... 4 Favorites Organizer Band Operation................................................................... 5 Technical Information.........
Setup Antenna Pack Whip Antenna 1) Locate and remove the Antenna Pack and the Whip Antenna from the carton. Remove the Antenna Connection leaflet, the AM antenna, the FM wire antenna and the FM dipole antenna from the Antenna Pack. 2) Refer to the Antenna Connection leaflet. Choose and connect an FM Antenna. Position the FM antenna. Connect and position the AM antenna. 3) Insert the AC cord. -2- 12VDC OUT OPT DIGITAL OUT FIRMLY push the AC cord connector into the back panel socket.
4) Place the radio in its intended location. Connect the AC plug to a 120 VAC outlet. 5) Press the Power button. You can now set the date and time. 6) To reach the date and time adjustment screen: First press and hold the JOG button until you see "HD RADIO & ANALOG" on the display. Then briefly press the JOG button three more times to reach the "SET CLOCK" screen. Use the VOLUME control to make an adjustment, then press the JOG button again to reach the next Date and Time value.
Radio Operation 1) Select the FM or AM band by pressing the AM/FM/Aux button on the front panel or the remote control. 2) Tune stations using TUNE or SEEK (faceplate or remote). See page 8 for more information. SEEK TUNING FAVORITE FM AM AUX JOG SEEK Tune & Seek Buttons TUNING Numeric Entry Tuning (remote control only) Press the NUMERIC ENTRY button, then enter the station frequency using the PRESET numbered buttons.
FAVORITE Organizer Band Operation The Favorite band organizes up to thirty of your favorite stations. It combines the stations you assign to the Remote Control numeric keypad as Presets with up to twenty additional Favorite stations. The Favorite band always places these stations in their frequency order, with FM stations followed by AM stations. 1) Each station assigned as a PRESET is included in the FAVORITE band.
Technical Information Receiving HD Radio™ broadcasts: A broadcast with an HD Radio™ digital signal does not immediately start to play when you tune to the station's frequency. The receiver builds up a reserve of digital information before it starts playing the audio. This digital signal reserve insures the audio program isn't affected by temporary drops in the strength or quality of the received signal.
-7-
Faceplate Quick Reference Faceplate and Remote Control All Faceplate controls are also on the Remote Control. HD Radio™ Program Stream indicator When visible, the current program uses HD Radio™ technology. HD CARRIER LIGHT When this HD symbol is visible, there is an HD Radio™ digital stream within the broadcast signal. SEEK If the AM band or FM Band is active, these buttons tune to the next broadcast (multicast streams within an HD broadcast are skipped).
ALARM 1, ALARM 2 Push and quickly release either button to activate Wake to Music Alarm, Wake to Tone Alarm or No Wakeup. Push and hold either button for two seconds to engage alarm setting adjustment. Alternate between the Volume control and the alarm button to make adjustments. FAVORITE While the AM or FM band is selected, push and hold this button for two seconds to assign FAVORITE status to a station.
Additional Information 1) Audio Display: This feature displays a radio broadcast's audio spectrum. It shows the intensity of the audio at ten different frequency bands. Once engaged, the Audio Display becomes the default screen. Any control action will replace the Audio Display until five seconds after the last control input. Use the INFO button on the remote or a "press and hold" of the JOG button on the radio faceplate to engage or disengage the Audio Display feature.
Additional Information Continued 3) Rear Input Configuration: The rear auxiliary input accepts a 3.5 mm stereo miniplug. Use it with all portable audio devices. The 12 VDC OUT can be used with special accessories, like a Cambridge SoundWorks portable audio player dock. The OPT DIGITAL OUT provides a SPDIF-compliant audio signal of the tuner output. Alarm Features The SoundWorks Radio 820HD has two independent wakeup alarms.
Alarm Operation 1 - Wakeup Settings Adjustment 1) Press and hold down either Alarm button for two seconds. The radio switches to the HOUR adjustment display. HOUR adjustment 2 sec 2) Adjust VOLUME to select the desired hour. FAVORITE FM AM AUX JOG HOUR change 3) Tap the Alarm button again to move to the MINUTES adjustment display.
4) Adjust VOLUME to select the desired MINUTES setting. FAVORITE FM AM AUX JOG MINUTES change 5) Tap the Alarm button again to move to the BAND adjustment display. BAND adjustment 6) Adjust VOLUME to select the band of a wakeup station.
5) Tap the Alarm button again to move to the FREQUENCY adjustment display. FREQUENCY adjustment 6) Adjust VOLUME to select the frequency of a wakeup station. FREQUENCY change FAVORITE FM AM AUX JOG 7) Tap the Alarm button again to move to the WAKEUP VOLUME adjustment display. WAKEUP VOLUME adjustment 8) Adjust VOLUME to select the desired wakeup volume.
9) Tap the Alarm button again to move to the DAILY PATTERN adjustment display. DAILY PATTERN adjustment 10) Adjust VOLUME to select the desired daily alarm repetition. Daily Alarm Options Daily: Weekdays: Weekend: Once: Alarm sounds every day. Alarm sounds every Mon, Tue, Wed, Thu, Fri. Alarm sounds every Sat, Sun. Alarm sounds once, then cancels after reset. FAVORITE FM AM AUX JOG DAILY PATTERN change 11) Tap the Alarm button again to complete the alarm adjustment session.
Alarm Operation 2 - Alarm Activation 1) Press and quickly release either the Alarm 1 or the Alarm 2 button ("tap" the button). The radio switches to the Alarm Activation display. first tap 2) While the display is visible, continue to use the Alarm button to choose between Music Wakeup alarm, Tone Wakeup alarm and NO alarm. second tap 3) Once you see the desired Alarm Activation mode on the display, wait five seconds. The radio will store your request and return the radio to normal operation.
Alarm Operation 2 - Alarm Reset and Snooze RESET Once either alarm activates, reset the alarm by pressing either the Alarm 1 button, the Alarm 2 button or Power. These buttons reset a Wakeup Alarm Faceplate Remote Control SNOOZE The Snooze bar silences the wakeup alarm for a userdetermined interval. The wakeup alarm reactivates after the snooze interval.
Rev 1_8 English