user manual

Machine-Side Hopper Loaders
Assembly instructions 4-7
4.4.3. Mounting onto mixing hoppers with lateral inlet
A VT Series adapter is required to mount the
loader on a mixing hopper with a laterial inlet.
Two-liter models require a VT 1.0 adapter. Five-
liter models require a VT 2.3/70 or VT 2.8/70
adapter. Use the following procedure to mount
the loader to the mixing hopper:
1. Mount the adapter onto the swan-neck of
the mixing hopper.
2. Mount the loader onto the adapter.
F Observe the bearing capacity of the machine flange.
4.4.4. Mounting onto DT 30 dosing station
Two-liter loaders mount directly onto the DT 30
Dosing Station. Five-liter models require an AD 1/5
adapter.
Two Liter Models:
1. Mount the dosing hopper directly onto the
dosing container of the dosing station DT 30.
2. Mount the loader onto the dosing hopper.
F Observe the bearing capacity of the
machine flange.
Five Liter Models:
1. Mount the adapter piece directly onto the dosing
container of the dosing station DT 30.
2. Mount the loader onto the adapter piece.
F Observe the bearing capacity of the machine flange.
Figure 8: VT Adapter
Figure 9: DT 30
Figure 10: AD 1/5
Adapter