user manual

Machine-Side Hopper Loaders
8-6 Maintenance
8.2.3. Cleaning the unit
1. Open the toggle fasterner on the tension ring.
2. Tilt the turbine head upwards.
3. Remove the filter.
4. Clean the filter by means of compressed-air.
5. Clean the hopper loader by means of a vacuum cleaner.
6. Mount the filter. Pay attention for proper fit.
7. Mount the turbine head.
8. Mount the tension ring and close the toggle fastener.
& Order number
filter with sealing: 2-liter model: ID 37755
5-liter model: ID 34179