User's Manual

* Function control is available on the unit and the Remote Control.

** Function not available in this model.

1. POWER*

Press this button to turn the unit ON and OFF.

2. MONITOR SELECT

M1 Button – Sets the remote control code to allow control of the unit set to M1 mode.

M2 Button** – Sets the remote control code to allow control of the unit set to M2 mode.

3. SOURCE*

Each time the button is pressed, the change mode as DVD/USB, AV1, AUX and GAME

4. TV Mode Select

Switches certain function keys on the remote control for monitor functions.

5. DVD Source

This button is only active when remote control is in DVD mode. Each time the buttons is pressed one of the source (DVD and USB)

will be selected. If the USB are not plugged in, it will remain on DVD Source. Press to change source in sequence of DVD > USB.

6. PIX ( Picture Select )

Each time this button is pressed, the OSD picture adjustment displays the “Adjustment bar” for BRIGHTNESS, CONTRAST, COLOR,

TINT(For NTSC only) or RESET. Once the desired adjustment bar is displayed, use the VOLUME+/ –VOLUME– button to adjust the

setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed.

7. SYSTEM MENU

Allow the user to access the system menu. Press cursor (pq) buttons to select desired picture control FMM screen mode, OSD language and

source default during power up.

8. CURSOR (pqtu)

Use these buttons to access menu selections on the screen.