Manualshelf

- Actiontec Wireless DSL Gateway User Manual

ManualsBrandsActiontec electronic ManualsNetwork RouterActiontec Wireless DSL Gateway GT701WG
41424344454647484950
40
Actiontec 54 Mbps Wireless DSL Gateway User Manual
41
Chapter 4 Using Advanced Setup
Transparent Bridging
Select this option to use the Gateway as a transparent bridge. This option should
only be used if the Gateway is being used as a Modem to connect one computer to
the Internet via a DSL connection. When the Gateway is being used as a transpar-
ent bridge, it does not provide any firewall security.
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Gateway to use the Point-to-Point over
Ethernet (PPPoE) or Point-to-Point over ATM (PPPoA) protocol.
“Broadband Connection via PPPoE” screen:
“Broadband Connection via PPPoA” screen:
If a User Name, Password and/or Static IP was entered in the Installation Buddy,
it should be displayed in the “Broadband Connection via PPPoE/PPPoA” screen. If
not, enter the information now. If the information is unavailable, contact the ISP.