- Actiontec Electronics DataLink V.90 PC Card Fax Modem User Guide
4
2 Before You Begin
5
DataLink V.90 PCMCIA Fax Modem
Windows 95 and 98
If the Modem is the rst PC Card purchased for the notebook computer, ensure
the computer’s PCMCIA controller has been initialized and properly congured
for Windows 95 and 98 by following these instructions:
1. After booting up the computer, select Start, Settings, then Control Panel.
2. In the “Control Panel” window, double-click PC Card. A properly installed
PCMCIA controller causes the “PC Card (PCMCIA) Properties” window
to appear.
If the “New Hardware Found” window appears, the computer’s PCMCIA
ports have not been congured. Follow the installation instructions in the
window, and refer to the computer’s documentation for more information.
The computer is congured to use the Modem. Next, go to chpater 3, “Installing
the Modem,” to continue installing and conguring the Modem.