User's Manual

Chapter 4 Basic Setup

6. Enter the User Name, Password, and Static IP provided by the ISP in the

“DSL Broadband Connection - PPP” screen. Click Next.

☞

Note:Ifthe ISP uses a connection method other than PPPoE

(DHCP or Static IP, for example) see “Advanced Setup” to con-

nect the Gateway.

7. Click Save and Restart in the “Save and Restart” screen.

8. The “Congratulations” screen appears. The Gateway is successfully configured.

The Power Light flashes rapidly while the Gateway restarts, then glows steadily

green when fully operational. The Internet Light will also glow steadily green. The

Gateway is now configured and users can start surfing the Web.

If an error stating the Web browser was unable to connect to the Internet appears,

check the configuration settings. Ensure all the information required by the ISP is

entered correctly.