User's Manual

Setting Up Static

IP Address

To communicate with the Gateway from a computer on

the network (to use the Web Configuration Utility, for example), the user may

have to switch the IP address settings from

DHCP-enabled to static IP, so that the

computer and the Gateway are on the same subnet.

To set up static

IP on a computer, select the operating system and follow the

instructions.

☞

Note:The following procedures are based on the Gateway’s fac-

tory default IP address. If the Gateway’s IP address has been

changed, enter the new IP address when instructed to enter an

address.

Windows 98 and 98 SE

1. From the desktop, click on the Start button in the lower left corner.

2. From the menu that appears, select Settings.