ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M+/100M/100MP IrDA Printer Adapter User’s Manual IR-100M □ ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com Web: www.actisys.com Release 3.2, December 9, 2003 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IMPORTANT – COMPATIBILITY We appreciate all of our honorable users of this product will read this compatibility list carefully.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TABLE OF CONTENTS INTRODUCTION .......................................................................................................................................................5 PARTS CHECK LIST ................................................................................................................................................9 SYSTEM REQUIREMENTS............................................................................................
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP INTRODUCTION The ACT-IR100M+ is the only Two-in-One IrDA parallel printer adapter that allows a mobile device to print directly via infrared. A mobile device user can print out via infrared port and he can also print out via parallel port from desktop PC. ACT-IR100M+ consists of a detachable serial IrDA adapter ACT-IR220L+ and a parallel adapter ACT-IR100MB.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100MB DB36 LED Indicator DB36 DB9 DB9 ACT-IR220L+ AC Adapter IR Port LED Indicator Figure 1 : ACT-IR100M+ ACT-IR100M+ LED Status Definition Name LED Status Off Blink Slowly On Release 3.2, December 9, 2003 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M DB36 DB36 LED Indicator IR Port IR Head AC Adapter Figure 2 : ACT-IR100M ACT-IR100M LEDs Definition Name Status Power LED (red) On Parallel LED (green) On or Blink fast Infrared LED (green) Blink Release 3.2, December 9, 2003 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100MP DB3 IR Head LED Indicator Figure 3: ACT-IR100MP Figure 3 : ACT-IR100MP ACT-IR100MP LED Status Definition Name LED Status Off Blink Slowly On Release 3.2, December 9, 2003 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP PARTS CHECK LIST When you unpack the package, the following items should be found. IR100M IR100MB IR100M+ IR100MP Print Adaptor ◎ ◎ ◎ ◎ Floppy Disk User’s manual & Win95Driver ◎ ◎ ◎ ◎ IR220L+ Dongle Built-in IrDA Port ◎ Built-in IrDA Port AC Adaptor ◎ ◎ ◎ User Guide (Booklet) ◎ ◎ ◎ ◎ SYSTEM REQUIREMENTS To use ACT-IR100M+/IR100M/IR100MP, you MUST meet the following requirements.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP SETUP IR100M/IR100M+ DB25F Printer Port CEN36F Port IR Head Figure 4: Connection Diagram with Passing Thru IR100MP IR Head CEN36F Port Figure 5: Connection Diagram without Passing Thru Release 3.2, December 9, 2003 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IR100M/IR100M+ IR Head 30° Maximum 100cm IR Port 30° Figure 6. Align Diagram Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through function) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Turn Off both your computer and printer. Connect ACT-IR220L+ to ACT-IR100M+ only if you have IR100M+. Connect your printer and ACT-IR100M+/IR100M/IR100MP.
ACTiSYS Corp. 14. 15. IR Printer Adapter IR100M+/100M/100MP Align your mobile device infrared eye with IR100M+/IR100M/IR100MP IR Head (see figure 3). The LED on IR100M+/IR100MP will flash slowly. Or the Infrared LED on the top of IR100M will flash. Choose Print, the LED on IR100M+/IR100MP will be on and printer begin to print out. Or the parallel LED on the top of IR100M will flash and printer beginning to print out. If not, see Trouble Shooting. Release 3.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TROUBLE SHOOTING AND COMPATIBLE PRINTERS LIST For help on general and miscellaneous problems you may be experiencing with your printing, refer to the following pages for possible solutions. Look up your problem and try the solution. Note: Please Check your printer is on the IR-100M+/IR100M/IR100MP compatibility list first. If not, contact Actisys technical support.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M Trouble Shooting Table IF your IR100M version is v2.2 or below, you MUST follow the power sequence. Problem Solution The power LED is not on. 1 Be sure there is 110V AC power supply to your wall outlet. 2 Be sure AC adapter is firmly plugged in the wall outlet. 3 Be sure AC adapter’s output is 7.5V ~ 12V inside positive. 4 Be sure AC adapter is firmly attached to IR100M.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP SPECIFICATIONS Model: ACT-IR100M+/100M/100MP Carrier: Infrared radiation (peak wavelength: 850 to 1050 nm) IrDA SIR Transmission Speed: Parity Bit: None Data: 8 bit Stop Bit: 1 bit Error Check: CRC Parallel Interface: 9.6, 19.2, 38.4, 57.6, 115.2K bps Centronics 36F/36M Cable to Parallel Printer. DB 25M/Centronics 36M Cable to PC Parallel Port. Power Consumption: 0.30W During Printing Operating Temperature: 0oC to 40oC (32oF to 104oF) IR100M+ 2.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP WARRANTY INFOMATION THE FOLLOWING WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP CONTACT INFORMATION ACTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com Web: www.actisys.com Release 3.2, December 9, 2003 © Copyright ACTiSYS Corporation 1999-2003.