Infrared Modem User's Manual

Infrared Modem User’s Manual

Page 18 of 41

Revision 1.0

2003/11 From 3JTech

For Connecting PSION using IrDA Port

This section uses PSION 618C as an example.

This installation guide is intended to help PSION users install the PP2I modem.

After following the procedures in this manual, the installation of the PP2I modem

should be complete and functional.

1. Connect the power and telephone line to your PP2I modem.

2. Turn on your PP2I modem.

3. On your PSION, go to System

Control Panel

Modem and setup your

modem. The screen below should show:

Select Generic modem settings and click OK.

4. Then, as shown below:

Under Modem Options, enter the name of the modem: PSION IrDA Modem,

speed: 57,600 baud, connect via: IrDA, and under fax class, select Auto.

Then, under Modem Advanced as shown on the next page, enter Flow

control:”None”, Terminal detect (DSR/DTR): (un-checked), Carrier detect

(DCD): (un-checked), and Modem type: Fixed Line, and click OK.