Manual

MICRO-LINE Reference Manual

REFERENCE

7. Align to within .010” TIR to axis of travel and mark the sec-

ond end mounting hole. Drill and tap.

8. Attach the scale and align to within .010”TIR to axis

of travel.

9. For the top mounting, form indicate to within .010” TIR over

each mounting hole and mark hole location. Drill and tap all

remaining holes. Attach the scale and align to within

.010” TIR to axis of travel.

10. For end mounting form, after scale is attached and

aligned, insert mounting hole covers.

11. Ensure the axis is still at its center of travel and the reading

head is centered on the scale. Mark the reading head

mounting holes.

12. Move the axis and drill and tap for 8-32 (M4).

MLTmanual.QXD 2/12/02 4:10 PM Page 5