Owner's manual

CALCULATOR
MILLPWR
Operation Manual Page 6-13
Returning Features
GeoCalc will return features to the part program by pressing the RETURN FEATURE
key. We will now program the second line, the arc, and the last line.
Press CANCEL to return to the program. Make sure you are after the first MILL LINE
step.
• Press LINE to get a new MILL LINE form. The FROM point is automatically set to
point B.
• You are in the X2 field in the TO point. This is point C, one of the points we have
in GeoCalc.
• Press the CALC key twice to get to the GeoCalc screen.
• Select the GeoPoint representing point C. Press the RETURN FEATURE softkey.
This moves the coordinates of point C to the part program and returns to the
program. Press USE to put the line into the part program.
The features in
the calculator will
not be lost until
the MILLPWR is
turned off or until
you clear the
calculator.
SERVO OFF
FEED 0 100%
INCH
SCALE 1.0000TOOL:
PROGRAM
FUNCTIONS
CLEAR
PROGRAM
EXPLODE
MORE
STEPS
RUN
OPTIONS
CURRENT PROGRAM
END OF 2
001 SET TOOL
002 MILL LINE
2.00
70°
70°
.625
A
B
CD
SERVO OFF FEED 0 100% INCH SCALE 1.0000TOOL:
PROGRAM
FUNCTIONS
CLEAR
PROGRAM
EXPLODE
MORE
STEPS
RUN
OPTIONS
CURRENT PROGRAM
END OF 3
001 SET TOOL
002 MILL LINE
003 MILL LINE