Owner's manual

DEMONSTRATION
MILLPWR
Page 4-2 Operation Manual
Selecting A Tool
A logical first step for most programs is to choose the tool that you want to start
with. Let’s use a ¼" FLAT END MILL.
Press the TOOL key.
Enter .25 followed by the enter key. ENTER
. 2 5
Press the TOOL TYPES softkey.
TOOL
TYPES
Arrow down to FLAT END MILL and press enter.
Press USE to complete the SET TOOL step.
TOOL
SERVO OFF FEED 0 100% INCH SCALE 1.0000TOOL:
INCH MM
TOOL
LIBRARY
CURRENT PROGRAM
1 OF 1
001 SET TOOL
SET TOOL 001
TOOL
INCH
TYPE
You can select a tool
from the Tool Library if
you like.
TOOL
0.250
TYPE
INCH
To FLAT END MILL
ENTER
USE