Instructions / Assembly
Table Of Contents
4 | P a g e
Usage and Fabricaon Guidelines
Painng In addion to screen prinng, Foam also has the perfect surface for paint adhesion.
There is no need to prime the surface before painng. Most convenonal tools and
painng methods will work successfully with Foam. However, for best results, follow
the surface preparaon guidelines introduces earlier. The surface of Foam will accept
acrylic-based lacquers, urethane and vinyl based paints. Please refer to Table 2 for a list
of pre-approved paint manufactures.
For outdoor use, to minimize heat buildup and possible deflecon, pastel colors, rather
than darker colors, are recommended. Painng the enre surface with dark colors is not
advised.
Varnishing Always follow the surface preparaon instrucons previous menoned. Air -dried
varnishes are recommended. Due to the nature of Foam, over-baked varnishes are
not suitable. Most available varnishes in the market will touch dry in 60 minutes and
thoroughly dry in 24 hours.
Table 1 Screen Prinng Inks
Manufacturer’s Name Trade Name Type of Ink
Colonial Prinng Ink Corp. C99, Gloss Vinyl Solvent Base
Colonial Prinng Ink Corp. D40 Ultra Violet
Nazdar Company System 2 Solvent Base
Nazdar Company GV Series 44000 Solvent Base
Nazdar Company Series 9700 Solvent Base
Nazdar Company Plascs Plus Solvent Base
Nazdar Company Series 70000 Solvent Base
Nazdar Company Series 2700 Water Base
Nazdar Company Series 3200 & Series 3600 Ultra Violet
T. W. Graphics Water Base
Table 2 Painng
Manufacurer’s Name Trade Name Type of Paint
Sherwin Williams Polane Polyurethane Base
Schwartz Chemical Company Rez-N-Lac Vinyl Base