Specifications
35
To order the “right ACV”
please provide the following:
Refer to valve specifications beginning on page 6 and
the selected ACV # for detail list of standards/options.
ACV #
SIZE
Main Valve Material
– Ductile Iron / Epoxy
– Other
Body Type
– Globe
– Angle
End Connection
– Threaded
– Flanged 150#
– Flanged 300#
– Grooved
Trim (Seat)
– Brass (Standard)
– Stainless Steel
Elastomers
– Buna-N (Standard)
– Other
Options or accessories as noted.
Additional information should be
included for the following series of
ACV’s
ACV 110 Float Valves
– Pilot mounting
Valve mounted
– Valve discharge vertical
– Valve discharge horizontal
Remote mounted
ACV 113 Solenoid Valves and Solenoid Override on
any ACV
– Voltage
– Actuation
– Energized to open main valve
– Energized to close main valve
ACV 113/413/513 Pump Control Valv
e
– Voltage
ACV 114 Rate of Flow Valve
– Desired flow rate
– Flow direction
– Over the seat “R”
– Under the seat
ACV 115 Pressure Reducing
– Desired outlet pressure
ACV 116 Pressure Relief/Sustainin
g
– Desired pressure setting
ACV 127 Altitude Valves
– Tank height (spring range)
METRIC CONVERSIONS
These formulas will assist you in using our
Engineering Data when your specifications are in met-
ric.
Volume
___ Liter x 0.264 = ___ U.S. Gallons
___ Cubic Meter (M3) x 264.2 = ___ U.S. Gallons
Flow
___ Liter/Sec x 15.85 = ___ GPM
___ Cubic Meter (M3)/Hr x 4.403 = ___ GPM
Length
___ Meter x 39.67 = ____ Inches
___ Meter x 3.28 = ____ Feet
Pressure
___ Kilo Pascal (kPa) x 0.145 = ___ PSIG
___ Kg/Cm2 x 14.19 = ___ PSIG
___ Bar x 14.5 = ___ PSIG
___ Meter of Water x 3.28 = ___ Feet of Water (Head)
___ Meter of Water x 1.419 = ___ PSIG
HOW TO ORDER
Individual Technical Bulletins are
available for the ACV’s listed in this
catalog.
Information Includes:
- Operational statements
- Installation guidelines
- Start-up instructions
Numerous other functional combinations are available.
Consult your Watts ACV representative for application
assistance.