User's Manual

P a g e 28 © Adam Equipment Company 2011
12.0 SERVICE PARAMETERS
12.1 USING “0000” TO ENTER THE CALIBRATION PARAMETER
• Press the [Tare] key during the display counting when turned on. The
display will ask for a code number, “Pin “ on the Weight Display.
• Enter the number 0000 when “Pin “ is displayed and then press
[Tare]. If another PIN number has been previously stored enter that
number instead.
• The displays will show the first parameters, called “F1” “CAL”.
• To select another parameter press the [U.Wt./Units] key to advance
through the parameters.
• Press the [Tare] key to enter a parameter.
• To exit a parameter, press the [Zero] key.
• The Weight window will show the parameter number and the Unit
Price and Count windows will show the word describing the function.
• When a parameter is entered by pressing the [Tare] key, the displays
will guide you through the parameter selected and the options
available.
The parameters available are:
“F1” “CAL” To enter the Calibration
“F2” “Pin” To set a new Pin number for access
“F3” “Unit” Enable Weighing Units