Product Manual

22 | P a g e © Adam Equipment Company 2010
• Press [Print/M+/Esc] to return to the group “FUnC 2”. If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to weighing.
Parameter Description Options Default
setting
P1 PCt
This parameter allows the
user to enter the Percent
weighing Function. See
Section 6.7.
None Enabled
always
P2 AnL
Enter the Animal Weighing
mode of operation, See
section 6.8
Set the filter value. Enabled
Always
7.3 RS-232 PARAMETERS
• Press [Z/T] to enter a parameter. Use the [Unit/

] key and [Pcs/

] key to
set the values or just the [Pcs/

] key to select the options.
• Press [Z/T] to confirm the change and then advance to the next parameter by
pressing the [Pcs/

] key.
• Press [Print/M+/Esc] to return to the group “FUnC 3”. If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to weighing.
This group of parameters can be set by the user for setting the RS-232 active or not,
baud rate, printing mode, accumulation mode, RS-232 language, and user or scale ID
numbers.
Parameter Description Options Default Values
or setting
C1 on
Enable or disable the
RS-232 interface
Prt on
Prt oFF
Prt on
C2 bd
Baud Rate
600
1200
2400
4800
9600
19200
9600