User's Manual

12 © Adam Equipment Company 2013
2.4 KEYPAD / DISPLAY FUNCTION
The keypad and display have a number of features as shown and explained below:
KEYS PRIMARY FUNCTION SECONDARY FUNCTION
[On/Off]
To turn the balance On or Off. ----
[Tare] Tares the balance and shows the net
weight value. Pressing the [Tare] again
will reset another tare value
A secondary function of "Enter" is for
setting parameters or other functions.
[Hold/Print] Will set the current weight to be held
on the display and will also send the
current weight data to the RS232
interface. When displaying the results
of the density test pressing
[Hold/Print] will send the results to
the interface.
When setting some parameters this key
will move the flashing digit to the right.
[Unit/Clr] Pressing this key will cycle through the
weighing units which are enabled
When in density mode pressing the
[Unit/Clr] will return the display to
normal weighing mode.
[Density] Pressing after the weights in the air
and in the liquid have been stored will
show the density and karat results.
Whilst setting parameters it will show
the previous option, or decrease the
value of the flashing digit.
[Air/Liquid] Stores the current weight into the
memory for density determination.
Whilst setting parameters it will show
the next option, or increase the value
of the flashing digit.
Zero
Stable
Capacity tracker
Weighing digits
Low battery indicator
Hold symbol
Alpha numeric display
Weight in Air
Weight in Liquid