Installation Instructions

ManualsBrandsAdams Rite ManualsAccess Control Power productsPower Supply for LR Exit Devices

ADAMS RITE MANUFACTURING CO.

ADAMS RITE POWER SUPPL

ART NUMBER PS-LR

260 Sant

a Fe S

treet, Pomona, CA

91767•800.872.3267•Fax 800.232.7329

Page 2 of 14

Rev Date: 10/2/07

80-0180-247 REV (G)

Need more information? Visit our website at:

www

.adamsrite.com

Table of Contents

1. CONFIGURE THE ADAMS RITE POWER SUPPLY_______________________________3

1.1. STEP-1 – SET PRIMARY VOLTAGE___________________________________________3

1.2. STEP 2 – SET OPERATION MODE ___________________________________________4

1.3. STEP 3 – SET HOLD TIMES_________________________________________________4

1.4. STEP 4 – CONNECT FIRE ALARM____________________________________________5

1.5. STEP 5 – WIRE INPUT CONTROL SWITCHES __________________________________5

1.6. STEP 6 – WIRE EXIT DEVICES _____________________________________________55

1.7. STEP 7 – MOUNT THE ADAMS RITE POWER SUPPLY ___________________________6

1.8. STEP 8 – INSTALL BACKUP BATTERIES (OPTIONAL)____________________________6

1.9. STEP 9 – PS-LR WIRING DIAGRAM __________________________________________7

1.10. STEP 10 – BASICDOOR WIRING DIAGRAM____________________________________8

1.11. STEP 11 – WIRE AUTOMATIC DOOR INTERFACE (OPTIONAL) 9 ___

1.12. STEP 12 – WIRING PRIMARY POWER CONNECTION 9

2. DESCRIPTIONS, PART NUMBERS AND MEASURMENTS 10

11010

2.1. DESCRIPTIONS AND PART NUMBERS_______________________________________10

2.2. SOLENOID VALUE READING 10

2.3. PS-LR VALUE READINGS 10

2.4. LED CONFIGURATION 10

2.5 SW1 DIP SWITCH SETTINGS 10

3. FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING 11

3.1. EXIT DEVICE WON’T UNLOCK WHEN I USE MY ACCESS CONTROL 11

3.2. I HAVE BLOWN FUSES IN MY PS-LR 11

3.3. THE EXIT DEVICE INTERMITTENTLY LOCKS AND UNLOCKS 11

3.4. NO POWER TO SOLENOID 11

3.5. NEITHER EXIT DEVICE RETRACTS AFTER CONTROL SWITCH IS ACTIVATED 12

3.6. DEVICES RETRACT EVEN WHEN THE CONTROL SWITCH HAS NOT BEEN ACTIVATED 12

3.7. BUZZING SOUND IS COMING FROM THE INSIDE OF THE EXIT DEVICE 12

4. APPENDIX 13

4.1 APPROVED REPLACEMENT FUSES 13

4.2. CONNECTOR SIGNAL DESCRIPTIONS 13

4.3 4.2.1 CONNECTOR J1 - BATTERY BACKUP 14

4.2.2 CONNECTOR J3 - FIELD WIRING 14

4.2.3 CONNECTOR J4 - MAIN POWER 14