Installation Instructions
ADAMS RITE MANUFACTURING CO.
ADAMS RITE POWER SUPPL
ADAMS RITE POWER SUPPL
Y
Y
P
P
ART NUMBER PS-LR
ART NUMBER PS-LR
260 Sant
260 Sant
a Fe S
a Fe S
treet, Pomona, CA
treet, Pomona, CA
91767•800.872.3267•Fax 800.232.7329
91767•800.872.3267•Fax 800.232.7329
Need more information? Visit our website at:
www
www
.adamsrite.com
.adamsrite.com
Page 6 of 14
Rev Date: 10/2/07
80-0180-247 REV (H)
1.7. STEP 7 – MOUNT THE ADAMS RITE POWER SUPPLY
**Caution**
T
HE
A
DAMS
R
ITE
P
OWER
S
UPPLY IS INTENDED FOR INDOOR USE ONLY
.
Install the Power Supply close to the door that will be operated. Securely fasten the Power Supply to the
wall using the mounting holes located in the back of the metal enclosure. Mounting holes are ¼ inch in
diameter. Box dimensions are 10” wide x 10” long x 4” high.
1.8. STEP 8 – INST
ALLING THE
BATTERY BACKUP SYSTEM (BBK-LR)
To install the Battery Backup in the 29-0624 Power Supply, you will need to order the BBK-LR Battery
Backup System Kit and two 12V, 7AH batteries such as EverOn EVA12-7.5F batteries or equivalent.
An orange jumper block has been installed into the BATT BACKUP connector of the Power Supply circuit
board. Remove this jumper by pulling the orange jumper free from the circuit board.
Install the Battery Backup System circuit board in the location shown below. Mounting points are available
in the enclosure for the Battery Backup System circuit board.
The Adams Rite Battery Backup System circuit board has a short wire harness to connect to the Adams
Rite Power Supply circuit board. Install the orange connector of this harness into the BATT BACKUP
connector of the Adams Rite Power Supply circuit board.
Wire the battery terminals of one battery to the (-) and (+) terminals on the BATT1 connector of the Adams
Rite Battery Backup System circuit board. Wire the battery terminals of the other battery to the (-) and (+)
terminals on the BATT2 connector of the Battery Backup System circuit board
BATTERY LOCATION
BACKUP
120V
R11
R14
10
9
Q1
Q2
R13
D9
R18
D10
R21
8
7
6
5
3
1
2
4
D3
BATT
R4
C3
29-0623
R8 R6 R5
230V
D6R7R9
REV
Z8
ASSEMBLY NUMBER
BACKUP
BACKUP
BATTERY BACKUP BOARD SYSTEM
BATT BACKUP
CONNECTOR
LED
BATTERY 1
BATTERY 2
#8-32 x 1/4" SEMS SCREWS
(4 places)
((++))
((
-
))
((
-
))
((++))