Manual

Before Use
1. Please keep this Hi-speed USB 2.0 Flash Disk away from heat, direct sunlight, and
water. Do not bend, flex, or drop it.
2. To prevent data loss and fatal damage to the USB 2.0 Flash Disk, please never
remove it from the USB port while data is being transferred. It is advised that
user perform “Safety Remove Hardware” by selecting “USB Mass Storage
Device” before removing the Flash Disk.
Driver Installation
To use this Hi-speed USB 2.0 Flash Disk, it is not necessary to install any driver in
Windows
®
ME, Windows
®
2000, Windows
®
XP, Mac
TM
9.x or later, Linux
TM
Kernel 2.4
or later. Only Windows
®
98 and Windows
®
98SE need to install the enclosed driver.
Driver Installation for Windows 98/98SE
1. Explore your driver CD, and please find “USB Flash Disk Win98 Driver” folder and
execute “USB Flash Disk Win98 Driver” to install USB Flash Disk Windows
98/98SE driver.
2. The Setup Wizard will show up as below, please click Next > to continue.