Contents USER NOTICE ...................................................................................................................................................................1 COPYRIGHT.......................................................................................................................................................................2 WHAT IS AES ENCRYPTION? ............................................................................................................................
User Notice • Serial number sticker is a license certificate, please keep it carefully. If you lost this sticker that means software warranty were terminate. • For secure reason, FNet doesn't have any back door in this software. Please don't forgot password that you setup. If you forgot password, original serial number that can help you to find out your password. • Except in case of improper use, we provide a 1-year guarantee of free service.
Copyright The user is responsible for all results. FNet Co., Ltd owns this product and its relative information; we grant you no right to this product. FNet Co., Ltd. also owns all unauthorized rights in this book. All rights reserved. No part of the FNet SecureDrive EX2 may be copied without the writing permission or authorization of FNet Co., Ltd, who prohibits the sell 、rental、exchange、lending、exhibition、revision、 destruction, etc. of the product, as there actions could infringe on FNet's rights.
What is AES encryption? In cryptography, the Advanced Encryption Standard (AES) is an encryption standard adopted by the U.S. government. The standard comprises three block ciphers, AES-128, AES-192 and AES-256, adopted from a larger collection originally published as Rijndael. Each AES cipher has a 128-bit block size, with key sizes of 128, 192 and 256 bits, respectively.
System Requirements • Pentium computers or 100% compatible computers. • Support OS: Microsoft Windows 2000 / XP / Vista / 7 (Except 64bits) • CPU Pentium or above. • 128 MB RAM. • • USB 1.1 / 2.0 / 3.0 An external USB hard disk. 4 FNet Corporation Copyright © 2009.
Partition structure in USB HDD After setup SecureDriveEX, your USB HDD will partition as below. AP AP PUBLIC area SECURITY area There are "autorun" program inside. When plug in USB HDD to computer, it will auto run the SecureDriveEX program. If not auto run, user can double click "autorun" program by itself. PUBLIC This partition is public area. It's let users put the files not important. All files in this area will not encryption. This partition is security area.
Setup (How to make USB device become to a security drive) 1. Connect the USB HDD to the computer. 2. Insert SecureDriveEX installation CD. 3. A few seconds a dialogue window will appear and tell you what to do next 4. You also can use browser and click the CD-drive icon in My Computer to execute the "Setup.exe". 6 FNet Corporation Copyright © 2009.
5. Access SecureDrive EX2 Wizard, you can select the language and the external hard drive you want to install. 6. After that, please click 「Next」to the next installation step. 6. Click "Install" Option icon. 7 FNet Corporation Copyright © 2009.
5. Attention: All the data in the hard disk will be deleted when you are partitioning your USB HDD. Click "Yes" for your confirmation. 6. Installation process. 8 FNet Corporation Copyright © 2009.
7. After finished the first step format, it will automatically to safe removed USB HDD. 8. please click the "Done" button and unplug your external hard drive. Then reconnect it to your computer again. 9 FNet Corporation Copyright © 2009.
First Time Start-Up (How to make USB device become to a security drive) 1. Connecting the USB HDD to the computer. 10 FNet Corporation Copyright © 2009.
2. A few seconds after your USB HDD plug-in, a dialogue window will appear and then click "OK” to finish the installation. 2. Access SecureDrive EX2 Wizard, and read the agreement carefully before installing. 3. Click the 「Next」button after accepting the agreement. 11 FNet Corporation Copyright © 2009.
4. Click the "Next" before Find out the attached serial key as the yellow label, and key in the serial number correctly. Click " Next" for next step. 5. The USB hard disk will be divided into two areas, one is the public area, the other one is security area. The capacities of two areas will be decided and judged by user. Click " Next" after filling with the capacities to two areas. * Public area can be set to 0 M, it will no public area after installation.
less than 8MB, because the partition limitation. 6. You can choose AES encryption 128, 192, 256bits based on your demand. 7. You can setup password option here, including 「Password hint」, 「Password」, and 「Confirm password」 8. After deciding your password setup, please click 「Next」button to the next step. 9. Attention: All the data in the hard disk will be deleted when you are partitioning your USB HDD. Click "Yes" for your confirmation. 13 FNet Corporation Copyright © 2009.
10. Installing. 11. After the installation, please click 「Done」 button to finish it. 14 FNet Corporation Copyright © 2009.
14. SecureDrive EX2 main interface. (The default status is locked, and you have to type the password you set before to show up security disk.) 15 FNet Corporation Copyright © 2009.
Unlock Steps 1. Connect the USB HDD to the computer. 2. Some of Windows OS will not auto run SecureDriveEX2. After show out this dialogue window, please select SecureDriveEX2 icon and click "OK". 16 FNet Corporation Copyright © 2009.
3. Now the security drive is locked, it can not been found from My Computer. 4. After key in the accurate password and click the red "Lock" or "enter" to release the security area. 17 FNet Corporation Copyright © 2009.
3. It is unlocking now. 18 FNet Corporation Copyright © 2009.
4. The information of hard disk and security area are displayed after unlocking. 5. The drive of "Security" can be seen via My Computer. 6. Every file that you put into security drive is automatically encryption in real time. 19 FNet Corporation Copyright © 2009.
Lock Steps 1. The security area hasn't been locked; the Security drive is seen obviously from My Computer. 20 FNet Corporation Copyright © 2009.
2. Click the "graphic HDD" or the "blue lock" for locking the security area. 3. It is locking now. 21 FNet Corporation Copyright © 2009.
4. The password input request will be displayed after locking the security area. 5. The Security drive cannot be found anymore from My Computer. (The "security area" has been locked now.) 22 FNet Corporation Copyright © 2009.
Options Steps Click the icon of "Setting" and then access Setting window. Renew the password Key in the original password to the Current Password, input the new characters to the New Password and Confirm New Password and click "save" . 23 FNet Corporation Copyright © 2009.
Modify the password hint Attention: modify the password hint as well as update the password. Key in the original password to the Current Password, and then input new hint to the Password Hint as well as input the new characters to "New Password" and "Confirm New Password". And then click "Save". Language options Select a language for SecureDrive EX2 interface. 24 FNet Corporation Copyright © 2009.
Forget Password? Steps 1. Click the "Forget password" ! 25 FNet Corporation Copyright © 2009.
2. Enter the S/N on the yellow sticker. (Find out the attached serial key as the yellow label, and key in the serial number correctly.) 3. After entering the correct S/N, your password will show up in the column below. 26 FNet Corporation Copyright © 2009.
Others Click the icon of "SecureDriveEX" for the detailed specification. Click "?" for SecurDrive EX user's guide. 27 FNet Corporation Copyright © 2009.
Right-click the icon of SecureDriveEX in the notification area for displaying functional options. 28 FNet Corporation Copyright © 2009.
Safely Remove USB HDD Steps 1. However the status of locked (red lock) / unlock (blue lock) for the security area, both situations can be Safely Removed the USB HDD. 2. Click the transfer cable to remove the USB HDD. 3. Click "Yes" for removing the USB HDD. 29 FNet Corporation Copyright © 2009.
4. The USB HDD has been removed. The transfer cable appears broken. 5. Remove the USB HDD under the status of unlock, the security area will be automatically locked. 6. Due to the USB HDD is safely remove from your computer, if you want to execute SecureDrive EX2 again, please take the USB terminal off and then connect it again. 30 FNet Corporation Copyright © 2009.
Erase SecureDrive EX2 Steps 1. Connect the USB HDD to the computer. 2. Insert SecureDriveEX installation CD. 3. A few seconds a dialogue window will appear and tell you what to do next 4. You also can use browser and click the CD-drive icon in My Computer to execute the "Setup.exe". 31 FNet Corporation Copyright © 2009.
5. Select language and the secure-disk you want to Erase all data and applications to a brand-new USB HDD. 6. After that, please click 「Next」to the next step. 6. Click "Erase" Option icon. 32 FNet Corporation Copyright © 2009.
7. Attention: All the data in the USB HDD will be deleted if you uninstall SecureDrive EX2. Click "Yes" for uninstalling SecureDrive EX2. 8. It is erasing now. 33 FNet Corporation Copyright © 2009.
9. Just a few seconds after erase your USB HDD, it will automatically to safe remove your USB HDD. 10. SecureDrive EX2 has been erased and safe removed; and then please accord to the follow screen directions. * If your USB HDD with the power switch, please turn the power off and then turn it on. * If your USB HDD doesn't have power switch, please unplug the terminal of USB HDD and the connect it again.
Update SecureDrive EX2 If your application in USB HDD be deleted, or you want to update your applications. Steps 1. Connect the USB HDD to the computer. 2. Insert SecureDriveEX installation CD. 3. A few seconds a dialogue window will appear and tell you what to do next 4. You also can use browser and click the CD-drive icon in My Computer to execute the "Setup.exe". 35 FNet Corporation Copyright © 2009.
5. Select language and the secure-disk you want to update. 6. Click "Update" Option icon. 36 FNet Corporation Copyright © 2009.
7. Update software to USB HDD. 8. Auto safe remove USB HDD after update is completed. 37 FNet Corporation Copyright © 2009.
9. SecureDrive EX2 has been update and safe removed; and then please accord to the follow screen directions. * If your USB HDD with the power switch, please turn the power off and then turn it on. * If your USB HDD doesn't have power switch, please unplug the terminal of USB HDD and the connect it again. 10. If USB HDD can't be safe remove, please do safe remove by yourself. 38 FNet Corporation Copyright © 2009.
Contact us FNet Corp. is a professional R&D software company. Our software solutions bundled and cooperated with many hardware manufacturers. Therefore, FNet is only in charge of software technical problems and what suggestion you want to give FNet. Please see the contact below. Concerning the hardware problem please kindly connect with hardware manufacturers whose contact please refer to the printing box / the registration card of the hardware commodity. Taiwan Headquarter No.
USA USA Tel: +1-626-9214633 This phone number will be switched to Taiwan office, please notice the office time from 9:00 A.M. to 6:00 P.M. of Taipei time (GMT +8), it is the same as L.A. 6:00 P.M. ~ 3:00 A.M., N.Y. 9:00 P.M. ~ 6:00 A.M., or email to agnes@gotofnet.com , we will reply ASAP.About technical problem, please fill with our Tech Support Request . Others General Information :service@gotofnet.com :sales@gotofnet.
Technical Support and Services FNet Corp. is a professional R&D software company. Our software solutions bundled and cooperated with many hardware manufacturers. Therefore, FNet is only in charge of software technical problems and what suggestion you want to give FNet. Please see the contact below. Concerning the hardware problem please kindly connect with hardware manufacturers whose contact please refer to the printing box / the registration card of the hardware commodity.