ADATA Full Size mSATA SSD User’s Manual Intel Smart Response Technology Setup Guide Step 1- Boot into BIOS Setup Menu Note: For GIGABYTE motherboard press delete key to enter BIOS Step 2- Set „PCH SATA control mode‟ to RAID (XHD)
ADATA Full Size mSATA SSD User’s Manual Step 3- Install OS (Windows 7, 8, Vista or later) and other required device drivers including Intel Rapid Storage Utility 1 2 3 4 5 6 2
ADATA Full Size mSATA SSD User’s Manual Step 3a- Intel Rapid Storage Utility 1 2 3 3
ADATA Full Size mSATA SSD User’s Manual Step 4- Turn off your computer Step 5- Insert ADATA mSATA SSD in the mSATA slot For Ultrabook For Desktop Step 6- Turn on computer and Boot into OS Step 7- Run the ISRT software through the task bar icon 4
ADATA Full Size mSATA SSD User’s Manual Step 8- Click “Enable acceleration” under “Accelerate” Step 9- Select the acceleration mode, and then click “OK. By default, Enhanced Mode is selected Note: Enhanced mode: Acceleration optimized for data protection. Maximized mode (recommend) : Acceleration optimized for input/output performance.
ADATA Full Size mSATA SSD User’s Manual Step 10- The page will refresh and report the new acceleration configuration in the Acceleration View Step 11- Congratulations! Yours system is now successfully configured with Intel Smart Response Technology! All brand names of Intel® are registered trademarks of Intel® Corporation. Registered trademarks ® 2013 by Intel Corporation reserved.