User manual

Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701G User Manual 63
REBOOTING THE MODEM
Before you reboot the modem, save configuration changes as described in “Saving the Current
Configuration” on page 60.
1 From the Main Menu, select Reboot to access the Reboot page.
2 Do one of the following:
• Select
Continue to reboot the modem.
• Select
Cancel to cancel the rebooting process.
It is unlikely that the modem will lock up (no response to any of your requests through the Web
interface and command-line interface). In this rare occurrence, power off the modem by
disconnecting the power plug, wait 30 seconds, then reconnect the power. This process allows
the modem to properly reset the power and eliminate the possibility of false values in memory.
However, please note that the preferred method of rebooting is to access the
Reboot page as
described in the above procedure.
WARNING - This will reboot without saving configuration
1. Continue
2. Cancel
Select (Return to exit) ->