Datasheet

APCI-3xxx Definition of application
1 DEFINITION OF APPLICATION
1.1 Intended use
The board APCI-3xxx
1
must be inserted in a PC with PCI slots which is
used as electrical equipment for measurement, control and laboratory
pursuant to the standard EN 61010-1 (IEC 61010-1).
The used personal computer (PC) must fulfil the requirements of
IEC 60950-1 or EN 60950-1 and EN 55022 or IEC/CISPR 22 and
EN 55024 or IEC/CISPR 24.
The use of the board APCI-3xxx in combination with external screw
terminal panels requires correct installation according to the series
IEC 61439 or EN 61439 (Low-voltage switchgear and controlgear
assemblies).
1.2 Usage restrictions
The APCI-3xxx board must not be used as a safety-related part (SRP).
The board must not be used for safety related functions, for example for
emergency stop functions.
The APCI-3xxx board must not be used in potentially explosive
atmospheres.
The APCI-3xxx board must not be used as electrical equipment according
to the Low Voltage Directive 2014/35/EU.
1.3 Limits of use
All safety information and the instructions in the manual must be followed
to ensure proper intended use.
Uses of the board beyond these specifications are considered as improper
use. The manufacturer is not liable for damages resulting from improper
use.
The board must remain in its anti-static packaging until it is installed.
Please do not delete the identification numbers of the board or the warranty
claim will be invalid.
1
APCI-3xxx = APCI-3010, APCI-3016, APCI-3110 and APCI-3116
7