User`s guide

Adept SmartController User’s Guide, Rev. K 19
SmartController Installation 2
2.1 Controller Installation
This equipment must be shipped and stored in a temperature-controlled environment.
See Table 2-1. It should be shipped and stored in the Adept-supplied packaging, which is
designed to prevent damage from normal shock and vibration. You should protect the
package from excess shock and vibration.
Before Unpacking
Carefully inspect all shipping containers for evidence of damage during transit. Pay
special attention to any tilt and shock indication labels on the exteriors of the containers. If
any damage is indicated, request that the carrier’s agent be present at the time the
container is unpacked.
Upon Unpacking
Compare the actual items received (not just the packing slip) with your equipment
purchase order, and verify that all items are present and that the shipment is correct.
Inspect each item for external damage as it is removed from its container. Contact Adept
immediately if any damage is evident. See “How Can I Get Help?” on page 17.
Retain all containers and packaging materials. These items may be needed in the future to
settle a damage claim.
Perform the following steps to unpack the Adept SmartController and Front Panel,
optional Adept sDIO Expansion Module, and optional pendant. Refer to the following
sections for information on mounting the equipment.
Table 2-1. Environmental Specifications
Ambient temperature 5° C to 40° C
Storage and shipment temperature –25° C to +55° C
Humidity range 5 to 90%, non-condensing
Altitude up to 2000 m (6500 feet)
Free space around controller (for proper
cooling)
10 mm at back, 13 mm on sides
Chassis protection class IP-20 (NEMA Type 1)