User`s guide

Connecting Customer-Supplied Digital I/O Equipment
Adept SmartController User’s Guide, Rev. K 55
Table 3-13. XDIO Digital I/O Connector Pin Assignments
Digital I/O Connector Ordering Details (Third-Party Sources)
The XDIO connector on the SmartController is a 50-pin, standard-density D sub-miniature
female socket. The customer-supplied cable must terminate in a suitable 50-pin Male
D-sub plug. The plug is not supplied by Adept.
Compatible connectors are manufactured by AMP and by Thomas and Betts. Contact
your nearest AMP or T&B Sales Office to find your local distributor.
AMP Part Numbers for 50-Pin Male D-Sub HDP-20 series D-Sub Connectors. Crimp
snap-in contacts. Order item 1 (includes cover) or item 2 (no cover). Contact pins not
included, order separately (item 3, quantity 50).
1. 747960-1 Kit (Connector body, shield, enclosure, jackscrews)
2. 205212-3 Connector body only (alternatives: 205212-1, 205212-2)
Pin Signal Pin Signal Pin Signal Pin Signal
1 Input 1001 2 1001 return 27 Output 0002+ 28 Output 0002–
3 Input 1002 4 1002 return 29 Output 0003+ 30 Output 0003–
5 Input 1003 6 1003 return 31 Output 0004+ 32 Output 0004–
7 Input 1004 8 1004 return 33 Output 0005+ 34 Output 0005–
9 Input 1005 10 1005 return 35 Output 0006+ 36 Output 0006–
11 Input 1006 12 1006 return 37 Output 0007+ 38 Output 0007–
13 Input 1007 14 1007 return 39 Output 0008+ 40 Output 0008–
15 Input 1008 16 1008 return 41 24 V Output
a
a
Limited to combined total of 1 A of current.
42 24 V Output
a
17 Input 1009 18 1009 return 43 24 V Output
a
44 24 V Output
a
19
Input 1010
20
1010 return
45
V
+
High Power
On Indicator +
46
V
+
High Power
On Indicator
–
21 Input 1011 22 1011 return 47 24 V return 48 24 V return
23 Input 1012 24 1012 return 49 24 V return 50 24 V return
25
Output
0001+
26
Output
0001–
Pin 1
Pin 17
Pin 34
Pin 18
Pin 33
Pin 50
XDIO