User`s guide

Appendix A - sDIO Module
66 Adept SmartController User’s Guide, Rev. K
Rack-Mounting the sDIO
To rack-mount the sDIO module in a standard 19-inch equipment rack, you must first
install the mounting brackets (see Figure A-2) on each side of the unit. These brackets
must be ordered separately, they do not come with the sDIO.
Figure A-2. Rack-Mounting the sDIO
Panel-Mounting the sDIO
To panel-mount the sDIO, install one bracket on each side of the back of the unit. Use the
screws from the accessories kit. See the following figure.
Figure A-3. Panel-Mounting the sDIO
3.6
TYP.
6.1
4.2
31.8
16.0
43.9
14.2
2X 40356-00003
R 3.6
190.0
2X M3 x 6MM
BOTH SIDES
482.8
462.0
14.0
10.0
18.0
346.4
4X M3 x 6 MM
14.0
6.6
16.0
359.6
27.6
273.9
2X 40356-00000
R 3.6
186.5