Network Router User Manual

Number of Channel Members: is is the number of devices in the 852 channel. In Bridging Mode
this only provides the number of devices in the NearSide channel. is is a read only eld for
debugging purposes.
Forward Rate (PPS): is is the average number of packets per second forwarded by the router
since the statistics were cleared. is is a read only eld for debugging purposes.
709.1 packets received: is is the total number of packets received from the NearSide by the
router since the statistics were cleared. is is a read only eld for debugging purposes.
709.1 packets sent: is is the total number of packets sent to the NearSide by the router since the
statistics were cleared. is is a read only eld for debugging purposes.
IP packets received: is is the total number of packets received from the FarSide by the router
since the statistics were cleared. e 852 IP packets are either 852 data packets or 852
conguration (management) packets. is is a read only eld for debugging purposes.
IP packets sent: is is the total number of packets sent to the FarSide by the router since the
statistics were cleared. e 852 IP packets are either 852 data packets or 852 conguration
(management) packets. is is a read only eld for debugging purposes.
852 Data packets received: is is the total number of 852 Data packets received from the FarSide
by the router since the statistics were cleared. is is a read only eld for debugging purposes.
852 Data packets sent: is is the total number of 852 Data packets per second sent to the FarSide
by the router since the statistics were cleared. is is a read only eld for debugging purposes.
852 Management packets received: is is the total number of 852 Management packets received
from the FarSide by the router since the statistics were cleared. is is a read only eld for
debugging purposes.
852 Management packets sent: is is the total number of 852 Management packets per second
sent to the FarSide by the router since the statistics were cleared. is is a read only eld for
debugging purposes.
Update Stats: is button updates the statistics and refreshes the display.
Clear Stats: is button zeros out the statistics, restarts the statistics time counter and refreshes
the display.
Bootup Log: is list the last 10 times that the GRouter device has been reset or power cycled. e
rst column labeled Power Loss Time shows the time the device was powered o or reset. e
second column labeled BootUp time shows the time the device rebooted. If the times are identical
then the device was reset not power cycled. If the times are dierent the dierence is the length of
time the device lost power.
Clear Boot Log: is button clears the boot up log and sets all the times and dates to zeros.
-53-