Network Router User Manual

2.12. Twin Mode Status Page
e Twin Mode Status Page displays operational state and statistics information about the
Redundant Twin Mode operation. Twin mode is an optional enhancement and is not activated in
a standard router. If your device does not support Redundant Twin Mode contact Adept to nd
out how it might be activated. Following is a brief description of each item listed on the page.
Fig.2.22: Twin Mode Status Page
Twin Mode Redundancy: is eld indicates whether twin mode is enabled or disabled (on/o).
Alarm/Fault State: is eld indicates the status of any alarms or faults.
Failure State: is eld indicates the status of any monitoring failures.
Operational State: is eld indicates the twin mode operational state.
Flags: is eld indicates the twin mode operational state ags for debugging.
-58-