User's Manual

aci_view 4-125
21 Dec 2001
See Table 4-54 for an explanation of the table attributes.
Return Values
• 0: The call was successful.
• -1: The call failed.
The external variable d_errno is set to one of the following
DAS error codes:
• EAMU
• EAMUCOMM
• EINVALID
• EDASINT
• ENOVOLUME
• ERPC
• ETIMEOUT
• ESWITCHINPROG
Refer to Figure 4-116 on page 4-126 for an example of the
aci_view function.
Table 4-54 Table Attributes
attrib Explanation
O occupied (slot occupied, medium is in its home position)
E ejected (slot empty, medium has been placed in the I/O unit)
M mounted (slot empty, medium has been placed in a drive)
I initial (attribute not used)
J in jukebox (slot empty, optical disk has been placed in the jukebox)
R reverse side mounted (slot empty, optical disk has been placed in a
drive)
Y empty (slot empty, no medium defined for the slot)
U undefined (special attribute, used by HCC/MVS)
T temp here (slot occupied, medium in the problem box)
A temp away (medium temporarily not at specified coordinated, in
transit on AML/2 with double robotic controller systems)