Operation Manual

CHRONO MODE

1. From any mode, press and hold E to enter chrono mode.

2. Press C to start chronograph.

3. Press D to stop chronograph.

4. Press and hold A to save data (if desired).

5. After data is saved, press A to return to chrono mode. If no data is saved, press

and hold D to reset chronograph.

6. Press B to return to time mode.

NOTE: While chrono is running, press E to change chrono views.

SPLIT/LAP

1. Press C to start chronograph.

2. Press C again to take lap reading.

3. Continue pressing C for desired number of laps (50 maximum).

4. Press D to stop chronograph.

5. Press and hold A to save data (if desired).

6. After data is saved, press A to return to chrono mode. If no data is saved, press

and hold D to reset chronograph.

NOTE: Maximum number of laps is 50. User cannot make a lap before 1 second from

the last lap measurement. If data allocation if full, display will prompt user to delete

stored data (oldest data will be offered for deletion first). SET-1 data can only be deleted

manually in data mode.

MY LOG MODE

1. Press B to enter data mode.

2. Press D to view stored sets. Press and hold D to delete current set. Press and

hold D further for 2 seconds to clear all stored sets.

3. Press C to view total, best, average, and laps of current set.