Operation Manual

DATE/TIME ANALOG-DIGITAL

SWITCHING DISPLAYS

1. Press A to advance from time mode to

calendar mode.

2. Press A again to return to time mode.

TIME/CALENDAR SETTING

1. In normal time display, Press B to enter

setting mode; year will begin flashing.

2. Press A to increase setting value.

3. Press B to set and advance to next setting value.

4. Setting sequence is year, month, date, 12/24-hour time, hour, minute, second.

5. Press nothing for 30 seconds, to automatically exit time/calendar setting mode.

10 LAP MEMORY DIGITAL FL145GB

REAL TIME DISPLAY MODE

1. Press A for EL in any mode.

2. Press C to toggle between Time 1 and Time 2.

3. Press and hold C to set Time 1 or Time 2 as

the default timer.

4. Press D to toggle chime on/off.

TIME/CALENDAR SETTING

1. In normal time display, press and hold A to enter setting mode; chime will begin

flashing.

2. Press C to increase setting value. Press D to decrease setting value.

3. Press B to set and advance to next setting value.

4. Setting sequence is chime, 12/24-hour time, hour, minute, second, year, month,

date, Auto EL.

5. Press A to save data and exit setting mode.

CHRONOGRAPH MODE

1. Press B to change to chronograph mode.

2. Press C to start chronograph; press D for lap when the chronograph is running.

3. Press D to change views while chronograph is running.

4. Press C to stop chronograph.

NOTE: When running, there is a maximum of 10 laps, afterward last lap will be

overwritten each time additional lap is recorded.