Specifications

ADJ Products, LLC - www.adj.com - Crazy 8 User Manual Page 17ADJ Products, LLC - www.adj.com - Crazy 8 User Manual Page 16
Crazy 8 Master-Slave Set Up
Crazy 8 UC3 Control
With this feature you can connect the xtures to one another
using the PowerCON input and output sockets. The quantity
that can be connected is 4 xtures maximum for 120V, and 7 x-
tures maximum for 240V. After the maximum xtures has been
reached you will need to use a new power outlet. They must be
the same xtures. DO NOT mix xtures.
Crazy 8 Power Cord Daisy Chain
Universal DMX Control: This function allows you to use a Elation®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Crazy 8 can be a 1, 9, 12, 15, or 21 DMX channel fixture. See
pages 18-25 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 7-9 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
This will allow you to create your own programs.
4. Follow the instructions on page 11 to select your DMX channel
mode and to set the DMX address.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode: This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “Sound Mode” is displayed, and
press ENTER.
2. Press the UP or DOWN buttons to choose either OFF or ON, and
press ENTER, then press and hold MENU for 3 seconds to con-
rm.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Show Mode: In this mode you can choose 1 of 4 show modes to run.
1. Press the MENU button until “Show Mode” is displayed, and
press ENTER.
2. Press the UP or DOWN buttons until you nd your desired show,
and press ENTER then press and hold MENU for 3 seconds to
con rm. See page 12 for more info.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Crazy 8 Operation
Master-Slave Operation This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The rst unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to the “Master” setting following the direc-
tions on page 11. After you have set it, select your desired operat-
ing mode.
3. Set the “Slave” units to the “Slave” setting following the directions
on page 11.
4. The slave units will now follow the Master unit.
Stand By Blackout the unit
Funcon
1. Auto Strobe (Full On)
2. Asyn strobe (Full On)
3. Sound Strobe (Full On)
Select Shows
Show 1-4
Mode LED OFF LED ON