Installation Guide

03-AG1-CONTRACTOR 2016-10-21

STEP 4: ATTACHING YOUR BOARDS

TIP: To hide the gap on the HINGE SIDE of the gate, you may

overlap your fence board to cover this gap. APPLICABLE TO

INWARD SWINGING GATES ONLY

TIP: It is recommended that your gate boards be cut 2”

shorter than the fence boards to allow the top of your

gate to be even with the fence and allow clearance under

the gate.

Now you can attach the rest of your boards onto the 2x4’s

on the gate using nails or screws.

By adjusting the tunbuckle on the truss cable you can ﬁne

tune the gate.

LATCH CATCH ASSEMBLY FOR DOUBLE DRIVE GATES