Operating instructions

5.5 Winding on the hook thread

ATTENTION!

Only use bobbins that are specially designed for this machine type!

–

Put the hook thread cone on the thread stand.

–

Conduct the hook thread through the threading guide on the

unwinder arm and through the tube 1.

–

Conduct the thread counter-clockwise around the tensioner 3.

–

Conduct the thread through threading guide 2 to t he bobbin 4.

–

Pull the thread beginning behind the tear-off knife 6 and tear it off.

–

Swivel the winder lever 5 against the empty bobbin.

–

Enter the number of the bobbin via touch s creen on the monitor.

When the bobbin is filled, the winding will be automatically

stopped by the winder lever 5.

Caution!

Please make sure that the entered number corresponds to t he

bobbin number before actuating the “Return” key.

“Return”

65 4