Operating instructions

5.6 Threading in the hook thread

Caution: Risk of injury!

Tur n off the main switch!

The hook thread may only be threaded with the sewing machine being

switched off.

–

Raise up the flap 1 and remove the empty bobbin 2.

–

Insert the bobbin 2 in a way that it moves in counter-clockwise

direction when unwinding the thread.

–

Conduct the thread through slot 3 and underneath the spring 4.

–

Pull the thread through the slot 6 and continue pulling until it

stands out about 3 cm.

–

Close the flap 1 and pull the thread through the thread guiding 5 of

the flap 1.

654