Operating instructions

Logging in to the system

–

The log-in takes place by scanning the operator barcode.

–

The operator can also log in manually as follows:

–

Press “Access”.

–

Press “Log in”.

–

Enter operator name and password.

Sewing can only begin if the system start and the scanning of needle

thread cone, hook thread cone and bobbin have been accomplished

faultlessly.

Otherwise the system is not ready for sewing and instead an error

message will be displayed

Sewing

–

Press “Sewing”.

The following screen will appear:

–

Scan in the pieces to be sewn.

Up to 9 additional bar codes can be defined in advance.

All predefined bar codes must be read in.

–

The seam sections can be sewn.

Green seam sections are unmonitored, the diode at the stop glows