Operating instructions

Technical specifications software

Intuitive user interface

Sewing programs with up to 30 seam segments

Switching over via strip detection, stitch counting or manually

Different setup masks and endlabel masks can be memorized

Teach-in function for ETT (electronically controlled needle thread

tension)

Test window for the thread tension

Display of the thread tension during sewing

Recognition of the needle and hook thread via barcode scanning

(if the option is available)

Recognition of the material part 1 and / or part 2 (resp. part 3) via

manual scanning

Alle seam sections can be defined with various parameters

The following parameters are automatically suppressed in the

rupture seam segment

RS function (bartacking via step motor)

HP function (pneumatic stroke adjustment)

FA function (thread trimmer)

Optical indicator “tearing seam” in the visual field of the operator

(LED - red)

Evaluation of the collected material data

Monitoring and active adjustment of the needle tread tension (only

ETT (electronically controlled needle thread tension))

Automatic thread breakage recognition

Deviations from the nominal values during a seam are recognized

and lead to a sewing stop

The sewing process can be stopped in the segment of the lateral

airbag by the seamstress.

In order to do this the “FA” button has to be pressed and

additionally the foot pedal has to be pushed into position 2.

The message “not O.K.” will be automatically issued for this seat.

After completing the last seam section all sewing parameters will

be memorized and the request to scan the next material bar codes

appears

Data entry in a data base or in a ASCII file

Different levels authorized for operators, supervisors and

production manager

Data backup also during power outage via UPS (Uninterruptible

power supply)