User`s guide

C/C++ Library •41
Visual Basic (Windows 95)
W_9111_EDI (ByVal cardNo As Integer, DIData As Integer) As
Integer
@ Argument
cardNo: The card number of PCI-9111 card initialized
DIData: The value accessed from extended digital input port
@ Return Code
ERR_NoError
5.9 _9111_EDO
@ Description
There are 4 extended digital output channels on PCI_9111. This function
is used to write data to extended digital output port. The extended digital
output channels can be set as three modes (refer to section 6.2.10);
however, the output EDO value can be put on the EDO pins only when the
EDO mode is set as EDO_OUT_CHN. Therefore, the program should call
_9111_Set_EDO_Function (refer to section 6.2.10) to set EDO mode as
EDO_OUT_EDO before writing data to EDO channels.
@ Syntax
C/C++ (DOS)
U16 _9111_EDO (U16 cardNo, U16 DOData)
C/C++ (Windows 95)
U16 W_9111_EDO (U16 cardNo, U16 DOData)
Visual Basic (Windows 95)
W_9111_EDO (ByVal cardNo As Integer, ByVal DOData As Integer)
As Integer
@ Argument
cardNo: The card number of PCI-9111 card initialized
DOData: The value will be written to extended digital input port
@ Return Code
ERR_NoError
5.10 _9111_EDO_Read_Back
@ Description
This function is used to read back the output data that is written to output
port last time.
@ Syntax
C/C++ (DOS)