User guide

14 Introduction

the second from slot 7 to slot 12, and the last from slot 13 to slot

19. Switch SWY1 shown is the on-board switch, controlling the

configuration of these two buffers.

Table 1-4: Trigger Bus Switch Functions

Figure 1-9: Trigger Bus Switching

Switch Function

P2 on switch

Enables/Disables (On/Off) bus buffer between first and

second segments

P3 on switch

Enables/Disables (On/Off) bus buffer between second

and third segments

P4 on switch

Determines direction of the bus buffer between first and

second segments, with high left to right and low right to

left

P5 on switch

Determines direction of the bus buffer between second

and third segments, with high left to right and low right to

left

P1 P2 P3 P4 P5

234