Owner manual

The ADS Enigma® is a state-of-the-art digital correlation logging system for determining the

location of leaks in buried water pipes. Enigma combines noise logging and noise correlation

into one operation to provide improved operational eciency.

QUICK REFERENCE GUIDE

Readback of the ADS Enigma

ADS Enigma Pod -

Installation on Water Meter.

From the PC, run the Enigma

software by clicking on the

desktop icon or programs menu.

The status window indicates

how many loggers have been

found in the case and asks for

conrmation before progressing

to the Enigma Readback wizard

shown overleaf.

Continued on reverse side.

These two buttons are the

logger Programming and

Readback buttons.

(The Enigma case lid must be

closed when programming or

reading back loggers via the

software.)

Ensure the USB communications

cable is connected. Click on the

Readback button which will

produce the following progress

box.

PAGE 1
® QUICK REFERENCE GUIDE Readback of the ADS Enigma The ADS Enigma® is a state-of-the-art digital correlation logging system for determining the location of leaks in buried water pipes. Enigma combines noise logging and noise correlation into one operation to provide improved operational efficiency. 1 From the PC, run the Enigma software by clicking on the desktop icon or programs menu. 2 These two buttons are the logger Programming and Readback buttons.
PAGE 2
QUICK REFERENCE GUIDE 5 The Readback wizard indicates the location it is going to store the data in the ENIGMA Database. It will ask for a Location name or ‘Zone’. This can be a DMA reference number or name, etc. It is possible to enter Zone – Area – Phase, etc. The minimum entry is the Zone field. 6 7 8 ® After entering a Zone name, etc. (above), click on the Next button. These dialog / progress boxes appear... Then the dialog box below The leak noise data may now be analyzed.