User Manual

ADS Eureka2R Leak Noise Correlator User Manual
36
Correlator
Battery
Operating Time: 7 hours (typical, no backlight)
Recharge Time: 1 hour (typical)
Charger Input: 90 to 260 volts (ac) / 10 to 18 volts (dc)
Physical
Dimensions
Correlator only: 11.8 x 4.7 x 2.2 inches (300 x 120 x 55 mm)
System in Carrying Case: 5.9 x 6.5 x 5.5 inches (405 x 165 x 140 mm)
Weight
Correlator only: 3.64 pounds (1.65 kg)
System: 16.98 pounds (7.7 kg)
Operating
Temperature
14° to 140° F (-10°C to 60°C)
Waterproofing
IP65 and IP68
Basic System Components
 Correlation Processor
 Single or Dual Radio Transmitters
 Two Accelerometer Sensors
 Headphones
 Battery Charger (mains voltage and 12Vdc input)
Optional Equipment
 Ruggedized Transport Case
 Large Ruggedized Transport Case (also holds battery charger and
hydrophones)
 Hydrophone Sensor Kit
 Correlator Reference Unit
 Sensor Extension Cable
 Sensor Grip Attachment (for connection to non-ferrous surfaces)
 Vehicle Mount Antenna (for increased range)
 PC Software
 Measuring Wheel
Note: ADS reserves the right to change specifications without notice.