Version 1.
Industrial PCs OPC7008 Product Portfolio Copyright © ads-tec GmbH Raiffeisenstr.14 D-70771 Leinfelden-Echterdingen Germany 2 © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 INDEX ABOUT US .......................................................................................................................................... 5 1 REMARKS ................................................................................................................................. 6 1.1 RELEVANT DOCUMENTATION FOR THE DEVICE .................................................................................... 6 1.2 EXPLANATION OF USED SYMBOLS .........................
Industrial PCs OPC7008 7.1 8 HARD DRIVE / FLASH SSD ......................................................................................................... 25 SOFTWARE & DRIVER INSTALLATION .......................................................................................... 26 8.1 INSTALLING THE OPERATING SYSTEM ............................................................................................ 26 8.2 TOUCH SCREEN DRIVER INSTALLATION ....................................................
Industrial PCs OPC7008 Pos : 1 /D atentechni k/Allgemei ne Hinweis e/Wir über uns/Wir über uns @ 2\mod_1254923190378_6.doc @ 6522 @ ABOUT US S ads-tec GmbH Raiffeisenstr. 14 D-70771 Leinfelden--Echterdingen Phone: +49 711 458 894-0 Fax: +49 711 4589 94-990 www.ads-tec.
Industrial PCs OPC7008 1 REMARKS 1.1 RELEVANT DOCUMENTATION FOR THE DEVICE The following documents are essential for setting up and operating this device: USER MANUAL (THIS DOCUMENTATION): Contains information for installation, commissioning and operating the device along with technical data of the device hardware. WEBSITE By using the website www.ads-tec.de, you can download drivers, software, user manuals, leaflets and flyers from the Download section on the website.
Industrial PCs OPC7008 1.4 TRADE MARKS We would like to emphasise that all names of hardware and software products used in this documentation, as well as all brand names of corresponding companies are subject to the general copyrights of the intellectual property in terms of trademarks, brand names and patents. Windows®, Windows® CE are registered trademarks of Microsoft Corp. Intel®, Pentium®, Atom™, Core™2, are registered trademarks of Intel Corp.
Industrial PCs OPC7008 1.6 ENVIRONMENTAL CONDITIONS The device may be operated under the following conditions. Failure to observe these specifications will terminate any warranty for this device. Ads-tec cannot be held liable for any damages arising due to improper use and handling.
Industrial PCs OPC7008 1.7 STANDARDS This device complies with the requirements and protective aims of the following EC regulations: • This device meets the test requirements for granting the CE sign according to the European test standards EN 61000-6-4 and EN 61000-6-2. • This device complies with the test requirements in accordance with EN 60950 (VDE0805, IEC950) "Safety of Information Technology Equipment" • The device meets the EN 60068-2-6 standard test requirements (sinus excitation).
Industrial PCs OPC7008 2 OPERATING INSTRUCTIONS This device contains electrical voltages and extremely sensitive components. User intervention is restricted to plugging in additional cards only. The manufacturer or a service partner authorised by the manufacturer should be consulted if you plan to make further modifications. For this type of work, the device must be switched off at the mains and the power lead must be disconnected.
Industrial PCs OPC7008 2.3 WARRANTY / REPAIR During the warranty period, any repair must be carried out by the manufacturer or by persons duly authorised by the manufacturer only. Pos : 14 /D atentec hni k/Betri ebs hi nweis e/Behandlung und Ents orgung von Lithi um-Batterien/Behandlung und Ents orgung von Lithi um-Batterien @ 1\mod_1247056308470_6.doc @ 5922 @ 2.
Industrial PCs OPC7008 3 INSTALLATION 3.1 INSTALLATION OPTION This device is intended for integration into switch panels or switching cabinets. In order to allow for a safe installation and operation (connector access), these switch panels or control desks must be accessible from the back. The device can be integrated into switching cabinets with a wall thickness of 2 to 13 mm. We recommend a minimum of 3 mm for correct installation with an IP65 front protection class.
Industrial PCs OPC7008 3.2 EXTERNAL DEVICE DIMENSIONS © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 3.3 INSTALLATION LAYOUT FOR OPC7008 Pos : 17 /D atentec hni k/Montage/Rei henfolge der Montage/Rei henfolge der Montage für OPC7008 @ 2\mod_1270555737081_6.doc @ 7562 @ 14 © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 3.4 ORDER OF INSTALLATION INTEGRATING THE DEVICE IN AN INSTALLATION RECESS 1) Before the device can be integrated in the panel, the tensioner fixing screws must be loosened until the tensioners open. (Item 1 - item 2). Note: Tensioners can be opened by using an Allen key of 3mm size. © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 2) Now, position the device inside the installation recess. Warning: In order to position the device correctly, the opened tensioners should be held back by hand while inserting the device in the installation recess. 3) Fasten the tensioner screws until hand-tight once the device is installed in the recess. (Item 3) Pos : 18 /D atentec hni k/Inbetri ebnahme/Systemmer kmale/Inbetri ebnahme für OPC 7008 @ 2\mod_1270119451010_6.doc @ 7533 @ 16 © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 4 COMMISSIONING Warning: The PC must be switched off before connecting or disconnecting any cables in order to prevent damage to the electronics! The device may only be switched on after acclimatising to the ambient temperature in order to avoid condensate accumulation. Make sure to meet the permissible voltage requirements for this device. After switching off and before switching on you must wait for at least 5 seconds. 4.
Industrial PCs OPC7008 4.
Industrial PCs OPC7008 5 OPERATION 5.1 FRONT CONTROL KEYS Depending on the equipment version, an operating system and a soft keyboard has previously been installed ex works. The keys on the front panel are occupied with the following functions by a specific driver in the soft keyboard: Level 1: Activate and deactivate the soft keyboard for letter/character input by using the touch screen. Level 2: Decrease display brightness. Level 1: Change task (Alt+ESC) in Windows.
Industrial PCs OPC7008 5.2 SOFT KEYBOARD If an operating system is installed ex works, the soft keyboard is also preinstalled. If the operating system is delivered separately with the device, the soft keyboard must also be installed on site. By using the soft keyboard, data can be entered via the touch screen like with an external keyboard. HOW TO OPERATE THE SOFT KEYBOARD FROM VERSION 3.
Industrial PCs OPC7008 5.3 TOUCH SCREEN The control system is equipped with a touch screen monitor. The touch screen monitor is internally connected with the USB interface. The driver software required for using the touch screen is integrated in the corresponding operating system, or can alternatively be installed from the enclosed service CD.
Industrial PCs OPC7008 6 INTERFACES 6.1 INTERFACE SETUP INTERFACE IRQ ADDRESS COM1 4 3F8h COM2 3 2F8h Pos : 27 /D atentec hni k/Schnitts tell en/Spannungs versorgung/Spannungs versorg ung für OPC 7000-Serie @ 2\mod_1270724385376_6.doc @ 7572 @ 6.2 24 V DC POWER SUPPLY This power supply is provided to the device by using a lead-through terminal with a screw connection.
Industrial PCs OPC7008 6.4 PS/2 CONNECTOR A keyboard can dire ectly be operated by using the PS/2 socket connecctor. PIN NUMBER SIGNAL NAME 1 Keyboard data 2 Mouse data 3 GND 4 +5V 5 Keyboard clock 6 Mouse clock Note: Since the timing off the integrated controller is specifically set up forr Cherry keyboards, keyboards of this manufacturer m should preferably be used.
Industrial PCs OPC7008 6.6 SERIAL COM INTERFACE (RS232) The serial interface is also used for digital data transmission. The RS232 interface can be connected by using a commercially available 9-pin SUB-D cable. PIN NUMBER SIGNAL NAME 1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Note: This interface is not electrically isolated.
Industrial PCs OPC7008 7 DRIVES 7.1 HARD DRIVE / FLASH SSD The storage medium is selected according to the customer requirements. The following options are available for storage: Flash SSD: A Flash SSD with a storage capacity of at least 1GB is used. Its capacity depends on the desired operating system and the additional programmes to be installed. Note: Recommendation for the choice of storage medium with a basic installation: SSD Flash memory: Windows CE 6.
Industrial PCs OPC7008 8 SOFTWARE & DRIVER INSTALLATION The device will be delivered with a pre-installed Windows / Linux operating system depending on what the customer wants. The drivers required for this are already installed and the operating system will be enabled by entering the licence information. Should an initial installation be required, please proceed according to the following steps.
Industrial PCs OPC7008 8.2 TOUCH SCREEN DRIVER INSTALLATION Note: When installing the driver, you'll have to take in account that the touch screen monitor is internally connected with the USB interface! The installation has to be carried out as described below: • The device does not have any integrated CD drive. The installation of the operating system can therefore only be carried out by using the USB interface.
Industrial PCs OPC7008 9 TECHNICAL DETAILS OPC7000 series 7008 7013 7015 7022 Display 8" TFT, 800 x 480 pixels 13.3" TFT, 1280 x 800 pixels 15.4" TFT, 1280 x 800 pixels 22.5" TFT, 1920 x 1080 pixels Display colours: 16.1 million colours at max Display data 256 thousand colours at max 16.7 million colours at max Manual display brightness adjustment Resistive industrial touch screen monitor Touch screen Computer data Processor Atom™ 1.1 GHz (Z510) - Atom™ 1.6 GHz (N270) - Celeron® 1.
Industrial PCs OPC7008 General data External dimensions: 256 x 192 x 66 mm 353 x 261 x 64 mm 413 x 290 x 68 mm 50mm Required depth clearance for panel integration 553 x 355 x 68 mm 54mm Match dimensions for panel integration² 240 x 176 mm 332 x 240 mm 392 x 269 mm 532 x 334 mm Weight Approx. 1.6 kg Approx. 2.8 kg Approx. 4.1 kg Approx. 7.6 kg Protection class IP 65 for the front Max.
Industrial PCs OPC7008 10 SERVICE AND SUPPORT ads-tec and its partner companies offer your customers a comprehensive service and support, which ensures availability of a fast and competent support with respect to all upcoming questions related to ads-tec products or assemblies. Since the devices manufactured by ads-tec are also used by associate companies, these devices might be configured in customer specific ways.
Industrial PCs OPC7008 11 COMPONENT REPLACEMENT Warning: Make sure that all cable connections are removed and that all supply voltages are disconnected from the device! Note: The cover must be removed before replacing any of the SSD flash modules. There is the opportunity of replacing the following components as well: 1 Lithium battery 2 Flash modules © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 11.1 1. REPLACING THE LITHIUM BATTERY LOOSENING / REMOVING THE RETAINER CLIP 1) The battery is kept in place with a plugged in retainer clip. The retainer clip can be removed from the battery compartment by carefully lifting the external tabs by using a flat-bladed tool (screw driver). INSTALLING / REPLACING THE BATTERY 2) Now the lithium battery can be removed. It must only be replaced by the same battery type. The type of battery to be used is: Lithium battery 1/2AA 3V (e.g.
Industrial PCs OPC7008 11.2 2. REPLACING THE FLASH MODULES REMOVAL Remove the screw(s) of the spacer bolt by using a Tx8 screw driver. © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 INSTALLATION 1) Carefully place the SSD flash module on top of the SSD flash slot so that the contacts on both sides match and press it carefully down. 2) Make sure that the SSD flash module is correctly put in place, and that the contacts are properly connected with the SSD flash slot contacts. Fasten the SSD flash module in position by using the previously removed screw. 34 © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 12 CE CONFORMITY DECLARATION OPC7008 © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 OPC7013 Glossary 36 © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 OPC7015 Glossary © ads-tec GmbH • Raiffeisenstr.
Industrial PCs OPC7008 OPC7022 ===== End of bill of materi als ===== 38 © ads-tec GmbH • Raiffeisenstr.