User manual

Chapter 9. Transaction Language 1 (TL1)
61185001L1-1 MX2810 M13 User Manual 9-7
<date> is the date in the form YY-MM-DD,
<time> is the time in the form HH-MM-SS,
<ctag> is the correlation tag from the command line,
<code> is the completion code:
COMPLD indicates normal completion
DENY indicates an error condition
<errcode> is one of the error codes. This line only appears after a
DENY condition.
An example of a normal TL1 response is:
Unit 1 01-10-09 16:20:05
M 1 COMPLD
In this example, "Unit 1" is the unit ID or <tid> that was set in the
menus. "01-10-09 16:20:05" is the date and time stamp. The second
line contains the <ctag> and the <code> which was COMPLD. This
indicates a normal completion.
An example of a TL1 response that contains an error code is:
Unit 1 01-10-09 16:20:05
M 2 DENY
ICNV
In this example, "Unit 1" is the unit ID or <tid> that was set in the
menus. "01-10-09 16:20:05" is the date and time stamp. The second
line contains the <ctag> and the <code> which was DENY. The
third line contains an error code since there was an error condition.
The error code may be looked up in the TL1 Error Code table
located in this document.
See the section TL1 Error Codes on page 9-23 for a discussion of
possible MX2810 error codes.