Specifications

Section 4 User Interface Guide Total Access 600R System Manual
114 © 2002 ADTRAN, Inc. 61200600L1-1A
SECURITY > RADIUS SERVER
The parameters for the RADIUS SERVER are configured in this menu.
SECURITY > RADIUS SERVER > SERVER 1
This is the IP address of the first RADIUS SERVER the unit should attempt to communicate with when
authenticating a Telnet session. Default is
0.0.0.0.
SECURITY > RADIUS SERVER > SERVER 2
This is the IP address of the second RADIUS SERVER the unit should attempt to communicate with when the
primary server does not respond. Default is
0.0.0.0.
ACTIVE
Turns this entry active when set to YES. Default is NO.
T
YPE
Selects the filter define list to reference (default is MAC):
MAC
from the SECURITY > FILTERS > FILTER DEFINES > MAC FILTER
D
EFINES list.
PATTERN
from the SECURITY > FILTERS > FILTER DEFINES > PATTERN
F
ILTER DEFINES list.
IP
from the SECURITY > FILTERS > FILTER DEFINES > IP FILTER
D
EFINES list.
FILTER LIST NAME
Selects between filters defined in the list. Default is no entry in filter list name.
NEXT OPER
The next operation to use to combine with the next filter in the list (default is END):
END
the last filter to combination.
AND
logically AND this filter with the next filter in the list.
OR
logically OR this filter with the next filter in the list.
Telnet radius is only available in A.04 firmware or later.