Specifications

Section 2 Engineering Guidelines Total Access 600R System Manual

Craft Port

The CRAFT port connects to a computer or modem. The CRAFT port input provides the following

functions:

• Accepts input from a PC or a modem for controlling the unit.

• Operates at 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps.

• Acts as input for either VT100 or PC control.

• Acts as an interface for flash memory software downloads using XMODEM.

Table 3 shows the

CRAFT port pinout.

10/100BaseT Connection

The 10/100BASET port (RJ-48C) provides a 10/100BaseT Ethernet LAN connection, which is used for IP

Routing, TFTP, SNMP, and Telnet connections. Table 4 shows the

10/100BASET port pinout.

Connector type RJ-48C

Table 3. CRAFT Pinout

PIN NAME DESCRIPTION

1 GND Ground - connected to unit chassis

2 RTS Request to send - flow control

3 RXDATA Data received by the unit.

4 DTR Data terminal ready

5 TXDATA Data transmitted by the unit.

6 CD Carrier detect

7 UNUSED —

8 CTS Clear to send - flow control

Connector type RJ-48C

Table 4. 10/100BaseT Pinout

PIN NAME DESCRIPTION

1 TX1 Transmit Positive

2 TX2 Transmit Negative

3 RX1 Receive Positive

4, 5 UNUSED —

6 RX2 Receive Negative

7, 8 UNUSED —