Specifications

Section 4 User Interface Guide Total Access 600R System Manual

INTERFACES

Use the INTERFACES menu to view and configure parameters for the T1 and Ethernet interfaces as shown in

Figure 6.

Figure 6. Interfaces Menus

INTERFACES (T1[0])

View the T1 interface status and configure T1 parameters from this menu.

INTERFACES (T1[0]) > CONFIG

Configure the various T1 parameters and enable/disable loopbacks from this menu.

INTERFACES (T1[0]) > CONFIG > TIMING MODE

Choices are NETWORK and INTERNAL. Select NETWORK when the unit will receive timing from the network.

Select

INTERNAL when the unit will generate the timing. Default is NETWORK.

The 0 in T1[0] represents a physical port. The T1 physical port is always 0.